Level 1 Practice Exam Questions And

Residential Construction Superintendent Level 1 Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• Which document defines the scope of work for a construction project?
• Bid form
• Specifications
• Purchase order
• Submittal log

Specifications detail materials, workmanship, and performance criteria, defining the scope of work.

2. The main purpose of a building permit is to:

• Increase project cost
• Ensure compliance with local building codes 1 / 4

• Allow insurance coverage
• Guarantee contractor payment

Building permits verify that construction meets code and safety requirements.

• What is the first step before excavation on a residential site?
• Surveying the foundation
• Ordering concrete
• Locating and marking utilities
• Backfilling

Marking utilities prevents damage and ensures safety during excavation.

• Which drawing shows the layout of walls, doors, and windows?
• Section view
• Elevation
• Floor plan
• Site plan

The floor plan provides a horizontal cut view showing spaces and wall locations.

5. The term “rough-in” refers to:

• Painting and finishing 2 / 4

• Installation of basic mechanical, electrical, and plumbing systems before

finishes

• Final inspection
• Setting appliances

Rough-in is the preliminary stage before walls are closed.

• The frost line affects which component most?
• Roof framing
• Foundation depth
• Drywall joints
• Ceiling insulation

Foundations must extend below the frost line to prevent heaving from freeze-thaw cycles.

7. A Gantt chart is primarily used for:

• Cost estimation
• Project scheduling
• Safety planning
• Quality control

A Gantt chart visually represents task durations and dependencies over time.

• / 4

8. The main responsibility of a construction superintendent is:

• Design approval
• Accounting
• Field supervision and coordination
• Marketing

Superintendents manage day-to-day operations, ensuring work progresses per plan.

• Which safety document must be maintained on-site by OSHA

requirement?

• Submittal log
• Safety Data Sheets (SDS)
• Purchase orders
• Job hazard analysis reports only

SDS provide hazard information for materials used on-site, required by OSHA.

10. Concrete should not be poured when:

• The humidity is low
• It is windy
• Temperature is below freezing without protection
• The sun is shining

Cold temperatures slow curing and can damage fresh concrete.

• / 4