Natural Gas Distribution Technician License Exam Practice Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf
Q1.Which component is typically used to reduce high-pressure gas to a usable distribution pressure?
- Odorizer
- Compressor
- Regulator
- Flow meter
Rationale: Regulators lower high inlet pressures to safe, controlled outlet
pressures for distribution.
- / 4
Q2.
The odorant most commonly added to natural gas for leak detection is:
- Benzene
- Mercaptan
- Methanol
- Sulfur dioxide
Rationale: Mercaptan provides the characteristic rotten-egg smell used for
leak detection.
Q3.What is the primary purpose of a gas shutoff valve?
- Increase flow
- Modify odorant levels
- Stop gas flow during emergencies or maintenance
- Filter particulates
Rationale: Shutoff valves isolate sections of the pipeline for safety.
Q4.Which type of pipe is most commonly used for modern gas distribution mains?
- Steel
- Copper 2 / 4
- Cast iron
- Polyethylene (PE)
Rationale: PE pipe is corrosion-resistant, flexible, and preferred for new
distribution installations.
Q5.What tool is used to detect underground gas leaks?
- Thermometer
- Combustible gas indicator (CGI)
- Infrared thermometer
- Ultrasonic tester
Rationale: CGIs measure combustible gas concentration in the air or soil.
Q6.Which pressure range is typical for residential natural gas delivery?
- 200–300 psi
- 10–20 psi
- 0.25–5 psi
- 50–100 psi
Rationale: Residential service operates at low pressure for safety and
appliance compatibility.
- / 4
Q7.
A service line connects the distribution main to the:
- Compressor station
- Transmission pipeline
- Customer meter
- Odorizer unit
Rationale: Service lines deliver gas from mains to customer meters.
Q8.Which method is commonly used to join modern polyethylene gas piping?
- Threading
- Brazing
- Heat fusion
- Riveting
Rationale: Heat fusion creates leak-free, permanent molecular bonds
between PE pipe sections.
Q9.What is the lower explosive limit (LEL) of natural gas?
- 1%
- 5%
- 10%
- / 4