.png){kind=logo}
NATE Air Distribution Test (Latest Update 2026 / 2027) Questions with Correct Answers | Grade A
Question:
How many holes must be made in a round duct in order to take a series of traverse readings?
Answer:
Two
Question:
A thermo-anemometer measures
Answer:
FPM directly
Question:
Dehumidification occurs when an air conditioning coil
Answer:
Operates at or below the dew point of the air moving across it 1 / 4
Question:
Who usually determines if a duct leakage test is to be performed and the test pressure at which it will be performed?
Answer:
The design engineer
Question:
When the dry bulb temperature increases, the relativity humidity of air
Answer:
Decreases
Question:
When the dry bulb temperature increases, the specific volume of the air
Answer:
Increases
Question:
When the dry bulb temperature increases, the density of air
Answer:
Decreases 2 / 4
Question:
The cfm per ton rate for normal comfort cooling is approximately
Answer:
400 CFM per Ton
Question:
Cooling air raises its
Answer:
Relative humidity
Question:
Air with a dry bulb temperature of 60 degrees and a wet bulb temperature of 60 degrees has a relative humidity of
Answer:
100%
Question:
Air with a dry bulb temperature of 60 degrees and a wet bulb temperature of 60 degrees has a dew point temperature of
Answer:
70 degrees 3 / 4
Question:
Return air grilles are not to be installed in
Answer:
Bathrooms or kitchens
Question:
The proper amount of air in CFM for each room is determined by
Answer:
A detailed room-by-room heat load calculation
Question:
On residential duct installations the accepted method of attaching duct sections to each other is?
Answer:
Using the slip and drive method
Question:
Which of the following is not an acceptable location for a thermostat?
Answer:
Five feet off the floor on an outside wall
- / 4
.png)