1 NCCCO NCCCO NCCCO CORE Exam Outline| Questions with Correct Verified Answers| Latest Update (NEW / ) | Guaranteed Pass | GRADE A
The use of these should be avoided when lifting near power lines, however if necessary should be non-conductive type - ANS ✓Tag lines
Avoid operating cranes or handling materials in this area of power lines - ANS ✓Above power lines
What does an operator do if the crane comes in contact with a power line - ANS ✓Remain in the cab
If it is necessary to leave the crane cab before power lines are de-energized after contact, how does the operator exit the cab - ANS ✓Jump
A crane can also become electrically charged when working close to these (radio, microwave, cell) - ANS ✓transmission towers
Before traveling on site with a load, be sure that this is allowed by the - ANS ✓Manufacturer
Ensure the boom low enough when traveling with a load to avoid the possibility of this - ANS ✓Backward collapse 1 / 2
2 NCCCO NCCCO
Always travel in this direction when traveling with a load - ANS ✓Toward the load
Most manufacturers do not permit travel with a load when the boom is in these settings - ANS ✓Boom extension, jib, or pinned section
To prevent a lattice boom crane from tipping forward, the boom should be in this position before traveling down an incline - ANS ✓Raised
To prevent a lattice boom crane from tipping backwards, the boom should be in this position when traveling up an incline - ANS ✓Lowered
Responsible for seeing that the ground conditions are adequate to support the equipment. - ANS ✓Controlling entity
Responsible for informing the user and the operator of the equipment of the location of hazards beneath the equipment set-up area (such as voids, tanks, utilities) - ANS ✓Controlling entity
Responsible for establishing a system to coordinate the operations of two cranes that operate within each other's working radius - ANS ✓Controlling entity
Hoist rope & reeving, op aids & safety devices, cab windows/equipment, hooks & latches, fluid levels (crankcase oil, coolant, hydraulic oil, etc.), elec
- / 2