.png){kind=logo}
NCCCO CORE Exam\Questions with Correct Answers/Already Grade A+/ latest / Before leveling a mobile crane on outriggers, an operator should ensure: - Answer ✔✔there is no weight of the crane bearing on any tires
Operating a mobile crane with a long boom, on uneven ground, what support condition should be considered? - Answer ✔✔Keeping 90 degree angle between cylinder rod and pad
What is the primary purpose fir a rooster sheave or auxiliary boom point sheave? - Answer ✔✔Separate the boom hoist lines
How many randomly broken wires in a lay length must there be on a mobile cranes hoist line, before it should be removed from service? - Answer ✔✔6
On a mobile crane, how many broken wires are permitted at the end connection of a pendent before it must be taken out of service? - Answer ✔✔1
Type 1 rotation resistant hoist wire rope has a design factor of: - Answer ✔✔5 to 1
How many randomly distributed broken wires in rotation- resistant hoist wire rope are considered for replacement? - Answer ✔✔2 broken wires in 6 rope diameters
The term net capacity is best defined by which of the terms listed below? - Answer ✔✔Gross capacity minus capacity deductions
Mobile cranes that are set up on barges, shall have a list chart provided by which of the entities listed below? - Answer ✔✔Manufacturer
When lifting loads on tires, mobile cranes are rated at what percentage of tipping? - Answer
✔✔75%
- / 2
How does the effective weight of a slowed extension relate to the actual weight of the extension? - Answer ✔✔Higher than the actual weight.
When load radius is between radii values, the operator must use the: - Answer ✔✔longer radius
Why should only approved attachments or extra counterweights provided by the manufacturer be placed on the rear of the crane? - Answer ✔✔They could cause a backward stability problem.
A mobile crane's jib is offset 15º versus its original 0º offset, but the boom angle remains
unchanged. In this situation, the load radius: - Answer ✔✔increases
Abruptly stopping a rapid swing on a long-boom mobile crane will produce what major effect? - Answer ✔✔Collapsing the boom.
When determining the position to a mobile crane should be left in over night, when high winds in the forecast the operator should: - Answer ✔✔Follow the manufacturers recommendations.
If a mobile crane is NOT set-up level and the operator swings the load from the high side to the low side, what effect will that have on the radius? - Answer ✔✔The radius increase.
Increasing the distance from the crane's center of gravity to the tipping axis will have what effect on the mobile crane? - Answer ✔✔Decreases stability.
Backward stability of a mobile crane is tested in which configuration listed below? - Answer ✔✔Basic boom at minimum angle with no load
Deflection of the boom while operating a mobile crane will increase? - Answer ✔✔Load Radius (Swings out)
- / 2
.png)