NCCCO Core Test Prep New

NCCCO Core Test Prep (New Update) Questions and Answers

QUESTION

With the boom at its highest angle and its shortest radius, how many wraps of wire rope need to be on the drum at all times?

Answer:

2

QUESTION

When measuring load radius of the crane. You measure from the axis of rotation of the crane to the ?

Answer:

Center of gravity of the load

QUESTION

What must be deducted from the gross capacity of the crane when the jib is erected, but not in use?

Answer:

Effective weight

QUESTION

Where can tip height be found?

Answer:

Range diagram

QUESTION 1 / 4

The Net Capacity of the crane is?

Answer:

Gross capacity minus all applicable deduc- tions

QUESTION

When booming down with a jib/extension erected the effective weight of the jib ?

Answer:

Increases

QUESTION

When using a crane in a duty cycle operation manufacturers usually de-rate the cranes capacity by?

Answer:

20%

QUESTION

How would the operator of the crane know if the radius on the LMI is correct?

Answer:

By measuring

QUESTION

According to OSHA, each series of voice signals contain how many ele- ments?

Answer:

3

QUESTION

What is the first element of voice signals given to a crane operator prior to the lift?

• / 4

Answer:

Function and direction

QUESTION

When working within the boom's length of energized power lines what is required?

Answer:

A dedicated spotter to maintain safe clearances

QUESTION

What is the first thing the operator should do if the crane comes in contact with an energized power line?

Answer:

Remain in the cab until power line is de-energized

QUESTION

The weight deduction for a stowed jib is ?

Answer:

The effective weight

QUESTION

If the boom angle of the crane falls between values on the load chart you should use?

Answer:

The lower angle

QUESTION

What is the most common type of wire rope used on a crane?

Answer: 3 / 4

Right regular lay

QUESTION

According to Table A of OSHA 1926.1408 the minimum clearance distance for a power line over 200 KV is?

Answer:

20 ft.

QUESTION

When lifting from a jib/extension and the main boom is not fully extended. What information must you use to get the gross capacity from the load chart?

Answer:

Main boom angle

QUESTION

According to Table A of OSHA 1926.1408 the minimum clearance distance for a power line up to 50 KV is?

Answer:

10 ft.

QUESTION

According to Table A of OSHA 1926.1408 the minimum clearance distance for a power line at 100 KV is?

Answer:

15 ft.

QUESTION

According to Table A of OSHA 1926.1408 the minimum clearance distance for a power line over 350 KV is?

• / 4