NCCCO MOBILE CRANE exam -

NCCCO MOBILE CRANE exam -

• What Standard Method hand signal is being illustrated?
• Swing
• Stop
• Emergency Stop
• Travel - ANSWER>>a.

• What standard method hand signal is being illustrated?
• Boom up
• Boom down
• Retract boom
• Hoist - ANSWER>>c.

3.When hoisting personnel, within what percentage of level must a telescopic boom crane be in order for the gross ratings in the load chart to remain valid?

• 1%
• 2%
• 5%
• 8% - ANSWER>>a.

• Which area do truck cranes without a 5th outrigger generally have no lifting capacity unless the

manufacturer states otherwise?

• The side
• The rear
• The front
• The outriggers - ANSWER>>c.

• What action does a signal person intend the operator to perform if he extends his arm at shoulder

height, makes a fist with his hand, and sticks his/her thumb up?

• Boom down
• Swing 1 / 2

• Boom up
• Extend boom - ANSWER>>c.

• According to federal requirements, under what conditions is it okay for a person to ride the headache

ball?

• When there is no other way to gain access
• When the lift has been approved by an engineer
• When other means would be more dangerous
• It is never okay - ANSWER>>d.

• What may happen to a properly rigged load when lifted off the ground unless the operator takes

account of boom deflection?

• It could swing out away from the crane
• It could swing in towards the crane
• It could raise absolutely vertically
• It could shift in its rigging - ANSWER>>a.

• According to OSHA 1926.1413, how many randomly distributed broken wires in rotation-resistant

rope are cause for replacement of the rope?

• 1 broken wire in 6 rope diameters
• 2 broken wires in 30 rope diameters
• 3 broken wires in one strand in one lay
• 2 broken wires in 6 rope diameters - ANSWER>>d.

• . What is the net capacity of a crane on main boom unless the manufacturer states otherwise?
• The capacity listed in the load chart minus the weight of the rigging and all attachments
• The capacity listed in the load chart plus the weight of the rigging and all attachments
• The capacity listed in the load chart minus the weight of the rigging and all attachments not in use
• The capacity listed in the load chart minus the weight of the rigging alone - ANSWER>>a.
• / 2