NCCCO MOBILE CRANE QUESTIONS
AND ANSWERS | LATEST UPDATE |
- Where must the operator's manual be kept during crane operations?
- The operator's manual must be kept in a location that is readily available
- The operator's manual must be kept in the cab at all times
- The operator's manual must be kept in the dispatch office
- The operator's manual must be kept in a secure place ✔✔b.
- What is the definition of "operating radius?"
- The distance from the base of the boom to the center of the load b. The distance from the front
- The distance from the center of rotation of the crane to the center of the load
- The distance from the center of rotation of the crane to the center of gravity of the load ✔✔d.
of the crane to the center of gravity of the load
- What shall be in the operators cab during crane operations?
- load charts
- Inspection reports 1 / 3
- Hand signal chart
- The crane log ✔✔a.
- What applies to the capacities below the bold line shown on a load chart?
- They are based on the structural strength of the crane
- They must not be used
- They are based on the stability of the crane
- They should only be used if the crane is set up on outriggers ✔✔c.
- Which of the following is considered duty cycle work?
- Pile- driving
- Setting trusses
- Clam - Shell digging
d Unloading trucks ✔✔c.
- In which quadrant are rough terrain crane capacities generally greater?
- Over the front
- Over the rear 2 / 3
- Over the right side
- Over the left side ✔✔a.
- When doing cycle work, the load chart must be reduced by how much?
- 50%
- 20%
- 30%
- none ✔✔b.
- What action does a signal person intend the operator to perform if he extends his arm at
- Boom down
- Swing
- Boom up
- Extend boom ✔✔c.
shoulder height, makes a fist with his hand, and sticks his/her thumb up?
- According to federal requirements, under what conditions is it okay for a person to ride the
- / 3
headache ball?