NCCCO Rigger 1 ( / ) Study Questions with Correct Answers Rated A+
- A wire rope that is a 6x19 classification could have how many wires per strand? - CORRECT
ANSWER -15 through 26 wires per strand
- How often should a synthetic web sling be inspected? - CORRECT ANSWER -Each day before
use
- Which considerations should be given to suspend lifting operations with a mobile crane? -
CORRECT ANSWER -Winds in excess of 35 mph
- What is the term that best describes surface wear on a wire rope sling to rubbing or sliding? -
CORRECT ANSWER -Abrasion
- Which of the following defects discovered during an inspection would cause for removing a
wire rope sling from service? - CORRECT ANSWER -Ten broken wires in one lay
- According to OSHA, each day before being used, all rigging hardware and slings shall be
inspected for damage or defects by a? - CORRECT ANSWER -Competent person
- When the hoist line is not vertical what type of dynamic force is being introduced to the
crane? - CORRECT ANSWER -Side pull
- What is the term used to describe the ultimate or maximum load that a sling fails at ? -
CORRECT ANSWER -Breaking strength
- A non-shouldered eyebolt is primarily designed for lifting in which plane ? - CORRECT
ANSWER -Vertical 1 / 2
- According to ASME B30.9, (Slings) what is the maximum width of an object that can be
placed in the eye of a wire rope sling? - CORRECT ANSWER -1/2 the length
- What is the term used to describe a sudden or unplanned loading of the crane when raising
or lowering a load that will increase the stress on rigging and the load? - CORRECT ANSWER - Shock loading
- What formula is used to determine the sling length when you only know the hook height
and the distance from the center of gravity to the pick point? - CORRECT ANSWER -A2+B2=C2 look at paper
- What is the approximate weight of one cubic foot of steel ? - CORRECT ANSWER -480
pounds (lbs)
- Which type of sling is required to have permanent affixed identification tag stating size,
grade, rated capacity for hitch type that can be used? - CORRECT ANSWER -Alloy steel chain sling
- Where would you measure to check the diameter of wire rope? - CORRECT ANSWER -Across
the crowns
- How is the working load limit of slings determined? - CORRECT ANSWER -Divide the
breaking strength by the design factor
- What is the formula used to find volume of a rectangle? - CORRECT ANSWER -Length x
height x width
- The tag on a synthetic web sling shall have what required information on it ? - CORRECT
- / 2
ANSWER -Name of manufacturer