NCCCO TEST 2 100 Correct Answers

NCCCO TEST 2 | 100% Correct Answers | Verified | Latest Version

When making a multiple crane lift, it is important for the operator to understand that: - ✔✔The weight may increase if the other crane lands the load

If a crane is not set-up level and the operator swings a load from the high side to the low side, the load

radius will: - ✔✔Increase

Most crane manufacturers reduce load capacity for duty-cycle operations because: - ✔✔Side loading forces may occur

On who's recommendations should a preventative maintenance program be set-up? - ✔✔Crane manufacturer

What is the standard rope used on most cranes? - ✔✔Right regular lay

The proper way to calibrate a boom angle indicator is: - ✔✔Using a level, raise the boom to horizontal and set the indicator at 0 degree.

The red area of an instrument gauge means: - ✔✔A dangerous condition exists

The best way to keep people from being injured from the counterweight of the crane is to: - ✔✔Fence or barricade the swing area of the crane

Only approved attachments or extra counterweights made by the manufacturer should be placed on the rear of the crane because: - ✔✔They could cause a backward stability problem

What is the first thing an operator should do before going under a low pipe rack? - ✔✔Post a signalperson to check clearance

• / 1