.png){kind=logo}
NCCCO TEST 2 EXAM WITH
When making a multiple crane lift, it is important for the operator to understand that: - Correct Answer-The weight may increase if the other crane lands the load If a crane is not set-up level and the operator swings a load from the high side to the low
side, the load radius will: - Correct Answer-Increase
Most crane manufacturers reduce load capacity for duty-cycle operations because: - Correct Answer-Side loading forces may occur On who's recommendations should a preventative maintenance program be set-up? - Correct Answer-Crane manufacturer What is the standard rope used on most cranes? - Correct Answer-Right regular lay The proper way to calibrate a boom angle indicator is: - Correct Answer-Using a level, raise the boom to horizontal and set the indicator at 0 degree.The red area of an instrument gauge means: - Correct Answer-A dangerous condition exists The best way to keep people from being injured from the counterweight of the crane is
to: - Correct Answer-Fence or barricade the swing area of the crane
Only approved attachments or extra counterweights made by the manufacturer should
be placed on the rear of the crane because: - Correct Answer-They could cause a
backward stability problem What is the first thing an operator should do before going under a low pipe rack? - Correct Answer-Post a signalperson to check clearance When working on outriggers, the only time they should be less than fully extended is
when: - Correct Answer-There is a load chart for this operation
When lifting loads from the water, the operator should be aware that: - Correct Answer- The load will increase when you pick the load from the water What is require to be on a Hydraulic Crane in order for it to lift a man basket? - Correct Answer-Boom length indicator When working on rubber, cranes are at what percentage of tipping? - Correct Answer-75%
- / 1
.png)