.png){kind=logo}
NCCCO TEST 2 Questions with / When making a multiple crane lift, it is important for the operator to understand that: - The weight may increase if the other crane lands the load If a crane is not set-up level and the operator swings a load from the high side to the low side, the
load radius will: - Increase
Most crane manufacturers reduce load capacity for duty-cycle operations because: - Side loading forces may occur On who's recommendations should a preventative maintenance program be set-up? - Crane manufacturer What is the standard rope used on most cranes? - Right regular lay The proper way to calibrate a boom angle indicator is: - Using a level, raise the boom to horizontal and set the indicator at 0 degree.The red area of an instrument gauge means: - A dangerous condition exists The best way to keep people from being injured from the counterweight of the crane is to: - Fence or barricade the swing area of the crane Only approved attachments or extra counterweights made by the manufacturer should be placed on the rear of the crane because: - They could cause a backward stability problem What is the first thing an operator should do before going under a low pipe rack? - Post a signalperson to check clearance When working on outriggers, the only time they should be less than fully extended is when: - There is a load chart for this operation When lifting loads from the water, the operator should be aware that: - The load will increase when you pick the load from the water
- / 1
.png)