NCCCO TOWER CRANE CERTIFICATION EXAM WITH

Page 1 of 30

NCCCO TOWER CRANE CERTIFICATION EXAM WITH

CORRECT ANSWERS GRADED A

When lifting personnel communication shall be maintained between three of the next four Person(s) being lifted - Operator - Signal person

The condition when the tower load block or hook assembly comes in contact with the upper Two-blocking

Load bearing members of the climbing and support system shall be inspected before each Climbing operation

Extensive planning must occur before a self erecting tower crane arrives on the job site. The plan should be divided into two major sections as follows 1 / 3

Page 2 of 30

Delivery, set up, erection and dismantle - Lifting operations

Before each climbing operation all load members of the support system shall be Inspected

Chain slings are required to be ID tagged

Welding on loads suspended by the crane can only be done if the load has Insulated slings

Splices in rall tracks shall have Smooth Joints

Hydraulic systems should have their proper fluid level checked 2 / 3

Page 3 of 30

Daily

If power fails during operations, the following shouldn't apply Do your best to finish moving load where it was designated to go

If load is undetermined who is to find out if load weight does not exceed crane rating at radius at which the load is to be lifted Person responsible for lift

Where should climbing instructions be kept ON Site

All climbing operations shall be performed under the supervision of Qualified person

• / 3