NCCCO TSS MANITEX EXAM
END OF
PAGE 1
ANSWER ALL QUESTIONS IN THIS SECTION
QUESTION 1
Blocking under the outrigger pads is used for what purpose? - ANSWERS- Distribute the weight of the crane and a load over a greater surface area
QUESTION 2
Which of the following statements apply during pick in Carry . - ANSWERS-Keep the boom as short as possible
QUESTION 3
When driving a crane under powerlines in transit, the minimum distance is _______ up to 0.75 KV dot - ANSWERS-4
QUESTION 4
If the crane does come into contact with powerlines, you should: - ANSWERS-
Remain in the cab and try to disengage Crane from contacts
QUESTION 5 1 / 3
NCCCO TSS MANITEX EXAM
END OF
PAGE 2
If it is necessary to leave the Crane after contact with powerlines before they can be de-energized, you should - ANSWERS-Jump down then slowly shuffle away or take short jumps with feet together
QUESTION 6
Always maintain at least _______ wraps on the drum unless the manufacturer states otherwise. - ANSWERS-2
QUESTION 7
The rigging on a personal platform must have a _____1 safety factor. -
ANSWERS-5
QUESTION 8
When the load is________ or more of maximum line pole the operator must test the brakes of the crane by lifting the load a few inches in applying the brakes. -
ANSWERS-90
QUESTION 9
- / 3
NCCCO TSS MANITEX EXAM
END OF
PAGE 3
The term running wire rope refers to: - ANSWERS-A wire rope that moves over
sheaves and drums
QUESTION 10
Defined the term assist Crane - ANSWERS-A crane used to assist in assembling and disassembling a crane
QUESTION 11
What must be done to ensure outriggers are in manufacturers specify position? - ANSWERS-Beam is pinned or marking shows it is correct configuration
QUESTION 12
The crane must be equipped with an audible signal device horn - ANSWERS-True
QUESTION 13
Frequently inspections are daily to monthly and periodic inspections are monthly to yearly - ANSWERS-True
- / 3