NFPA 1006 Exam V1 Latest

National Fire Protection Association (NFPA) 1006 Exam V1 (Latest Update 2025 / 2026) Questions and Answers | Grade A | 100% Correct (Verified Answers)

Question:

What are the two multiple point anchor systems?

Answer:

• Load sharing
• Load distributing

Question:

In a load _______ system, the stress on each anchor will only be equal when pulled directly in the center

Answer:

Load sharing

• / 4

Question:

In a load _______ system, the load is nearly equal on all anchors despite side to side movement

Answer:

Load distributing

Question:

Never use a girth hitch with _______ as an anchor

Answer:

Webbing

Question:

_____ degrees is the critical angle

Answer:

120 degrees

Question:

At 120 degrees, the load on each leg of the system will be approximately ___ percent of the load

Answer:

100 percent 2 / 4

Question:

__ degrees is the maximum preferred angle and ___ degrees is the critical angle that is not to be exceeded

Answer:

90 degrees, 120 degrees

Question:

The angle of re-direct should be ___ degrees or later

Answer:

120 degrees

Question:

______ _______ is a force created through mechanical means, which yields an output force greater than the input force

Answer:

Mechanical advantage

Question:

The _______ system that will perform the task is the best choice

Answer:

Simplest 3 / 4

Question:

____ ______ systems can be reset and have greater range than than even numbered systems, best choice for low angle rescue

Answer:

Odd numbered

Question:

_______ haul systems are constructed as a result of a simple system that was unable to effectively move the load

Answer:

Compound

Question:

The secondary system in a compound system is always the _____ or ______ advantage as the primary, never less than

Answer:

Same or greater

• / 4