.png){kind=logo}
NYS DMV Permit Test
A red and white triangular sign at an intersection means - Slow down and be prepared to stop if necessary.
A rectangular-shaped sign is - Speed limit sign.
A diamond-shaped sign is a - Road hazard sign.
What are the colors of the warning signs that indicate hazards ahead, such as curves in the road or narrow bridges - Black letters or symbols on a yellow background.
What are the colors of a sign which tells you the distance to the next exit of a highway - Green with white letters.
Which of the following must you obey over the other three - A policeman.
As you near an intersection, the traffic light changes from green to yellow. Your best action would be to - Be prepared to stop before the intersection.
You may cross a double solid yellow line - To turn into a driveway.
You may cross a single solid white line in the highway - If traffic conditions require.
A traffic light which has a green arrow and a red light means that - You may drive only in the direction of the green arrow.
What does a flashing yellow light mean - Proceed with caution.
An intersection has a stop sign, crosswalk, but no stop line. You must stop - Before the crosswalk.
You come to an intersection which has a flashing red light. You should - Come to a full stop, then go when safe to do so.
Which of the following is used on some highways to direct drivers into the proper lanes for turning - White arrows in the middle of the lanes.
You may not cross a single broken white (or yellow) line - When to do so would interfere with traffic.
- / 2
When the road is marked with a solid yellow line and a broken yellow line on your side you may pass - If traffic is clear.
A solid white line on the right edge of the highway slants in towards your left. That shows that - The road will get narrower.
What vehicles must stop at all railroad crossings - School buses and passenger buses carrying passengers.
What is the appropriate action to take when approaching a railroad crossing that does not have signals (such as lights or crossing gates) - Slow down and be prepared to stop.
If traffic prevents you from crossing all the way across a set of railroad tracks, you may proceed only when - There is room for your vehicle on the other side.
If an approaching train is near enough or going fast enough to be a danger, you must - Not cross the tracks until the train has completely passed.
You may drive around or under a gate that is being lowered or raised at a railroad crossing - Under no circumstances.
You are waiting in the intersection to complete a left turn. You should - Signal and keep your wheels straight.
The driver's left arm and hand are extended downward. This hand signal means that the driver plans to - Stop.
The driver's left hand and arm are extended upward. This hand signal means that the driver plans to - Turn right.
You have the right-of-way when you are - Already in a traffic circle.
When you want to make a right turn, your car must be - Close to the right side of the street.
You want to turn left at an intersection. The light is green but oncoming traffic is heavy. You should - Wait in the center of the intersection for traffic to clear.
When two vehicles enter an intersection from different highways at the same time, which vehicle must yield the right-of-way - Vehicle on the left.
You must yield the right-of-way to an approaching vehicle when you are - Turning left.
You come to an intersection which is blocked by other traffic. You should - Stay out of the intersection until you can pass through.
- / 2
.png)