.png){kind=logo}
Ohio Crane Rigger Level 2 Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2025|2026 Q&A | Instant Download Pdf
- What is the primary role of a Level 2 Rigger on a jobsite?
- Operate cranes
- Supervise entire lifting operations
- Plan and execute rigging configurations for complex loads
- Perform crane maintenance
Rationale: Level 2 Riggers are responsible for planning more complex
lifts and selecting rigging methods.
- When calculating sling tension in a bridle hitch, which factor has the
- Load weight only
- Sling angle
- Sling material 1 / 3
biggest effect?
- Weather conditions
Rationale: Sling tension increases significantly as the sling angle
decreases.
3. A sling angle less than 30° from horizontal is considered:
- Safe
- Highly hazardous
- Acceptable
- Standard practice
Rationale: Angles less than 30° dramatically increase tension and risk
sling failure.
4. The center of gravity (CG) of a load must be:
- Ignored
- Below the pick point
- To one side of the load
- Directly under the hook when lifted
Rationale: For a stable lift, the load must hang with CG under the
hook.
- When determining hitch type for a load that is loose or bundles, which
- Vertical hitch
- Choker hitch
- Basket hitch 2 / 3
is best?
- Bridle hitch
Rationale: Choker hitches help secure and control loose items.
- Which sling type is most resistant to abrasion and high temperatures?
- Synthetic web sling
- Round sling
- Wire rope sling
- Polyester sling
Rationale: Wire rope slings withstand heat and abrasion better than
synthetics.
- What is the minimum recommended number of wire rope clips for a
- 1
- 2
- Determined by rope diameter
- None required
termination?
Rationale: The number of clips depends on wire rope size per
manufacturer charts.
8. When lifting a load where the CG is closer to one lifting point:
- Both slings share equal load
- Load balances naturally
- Sling nearest the CG carries more load
- Sling further from CG carries more load
- / 3
.png)