PETE 2031 LSU (ACTUAL / ) EXAM 1 QUESTIONS AND
VERIFIED ANSWERS
What is the temp in degrees Rankine at zero F? - ---Answers- ---460 degrees
The formation volume factor is a ratio of:
- volume of gas to volume of liquid in pore space
- volume of rock to volume of pore space
- grain volume to total volume
- volume of reservoir oil to reservoir brine
- volume of fluid in the reservoir to volume of fluid at
standard conditions - ---Answers----e. volume of fluid in the reservoir to volume of fluid at standard conditions
The dimensions of porosity are:
- length
- length2
- 1/(length3)
- non-dimensional fraction (or percent)
- force/area - ---Answers----d. non-dimensional fraction (or
- / 3
percent)
What is the lowest possible porosity for uniform sphere packings? - ---Answers----26% (0.26)
(pore volume) + (grain volume) = what?
- irreducible volume
- porosity
- bulk volume
- void volume
- minimum porosity - ---Answers----c. bulk volume
Porosity is related to the economics of petroleum recovery because it is related to what?
- the volume of oil or gas
- the quality of the oil
- the time and cost to drill the well
- the gas/oil ratio
- the rate oil can be produced - ---Answers----a. the volume
of oil or gas
To measure porosity in the laboratory, one can measure bulk volume and what other value?
- average grain size 2 / 3
- pore volume
- rock density
- permeability
- core dimensions - ---Answers----b. pore volume
The effective porosity is:
- the porosity created by chemical dissolution
- the fraction of the porosity with pores larger than 1 micron
- the porosity that is created by the original grains
- the part of the porosity that is interconnected
- the void space that contains oil - ---Answers----d. the part
of the porosity that is interconnected
In most calculations, saturation should be expressed in what units?
- liters
- fraction
- barrels
- percent
- mL - ---Answers----b. fraction
Endpoint oil saturation represents:
- / 3