Practice Exam Questions And Correct

Certified Elevator Inspector (CEI) Practice Exam Questions And Correct Answers (Verified Answers) Plus Rationales 2026 Q&A | Instant Download Pdf

• What is the primary purpose of a car top inspection?
• To check fire safety systems
• To verify elevator cab aesthetics
• To ensure mechanical and electrical components are safe
• To inspect passenger behavior

Rationale: Car top inspections focus on mechanical and electrical

components to ensure safety and proper operation.

• Which component prevents the elevator car from falling in case of

overspeed?

• Governor rope 1 / 4

• Safety gear
• Counterweight
• Hoistway door

Rationale: The safety gear engages when an elevator exceeds its rated

speed to stop the car safely.

3. The ANSI/ASME A17.1 code primarily governs:

• Fire alarm systems
• Electrical wiring of buildings
• Elevator and escalator safety
• Occupational safety

Rationale: ANSI/ASME A17.1 sets safety standards for elevators,

escalators, and related conveyances.

• What is the minimum clearance required between the car top and

hoistway ceiling?

• 6 inches
• 42 inches
• 24 inches
• 60 inches

Rationale: A minimum of 42 inches is required for safety during car top

inspections and maintenance access.

• Which device protects an elevator from excessive electrical current?
• Transformer 2 / 4

• Contactor
• Overcurrent protection device
• Brake resistor

Rationale: Overcurrent protection devices like fuses or circuit breakers

prevent damage and fire from electrical overloads.

• Which of the following is a primary requirement for machine room

access?

• Keyless entry
• Restricted access to authorized personnel
• Visibility from lobby
• Automatic door lock

Rationale: Safety codes require that only qualified personnel can access

the machine room to reduce risk of injury.

7. The pit of an elevator must be capable of supporting:

• Only the car weight
• Car, counterweight, and buffer impact loads
• Just the counterweight
• Passengers only

Rationale: The pit structure must support all dynamic and static loads to

ensure safety during operation and emergencies.

• What is the main function of a governor in an elevator system?
• Control door operations 3 / 4

• Activate lighting
• Detect overspeed and trigger safety gear
• Balance the counterweight

Rationale: The governor monitors car speed and activates the safety gear

if the elevator exceeds rated speed.

9. Elevator car doors are required to reopen if:

• The alarm sounds
• An obstruction is detected
• The motor overheats
• The car reaches top floor

Rationale: Door reopening systems prevent injury or entrapment when an

object blocks the doorway.

• How often must hydraulic elevators be inspected according to ASME

A17.1?

• Every 6 months
• Every 5 years
• Every 12 months
• Every 24 months

Rationale: Hydraulic elevators require annual inspections to ensure

operational and safety compliance.

• Which of the following is true about emergency stop switches?
• They stop the elevator gradually
• / 4