SYSTEMS TECHNIQUES AND DOCUMENTATION

11

Chapter 2

SYSTEMS TECHNIQUES AND DOCUMENTATION

TEACHING TIPS

I normally introduce flowcharting symbols with simple examples on the board. I first introduce a very simple manual flowchart involving only three symbols. An example would be the preparation of a sales order. This would show a customer order coming into the process and a completed sales order coming out. Then I mention how computer symbols could be added.

From experience, I have discovered that the single most important thing for students to learn in analytical flowcharting is the sandwich rule. About 90% of all mistakes seem to involve a violation of this rule. The second largest problem involves separating various functions (e.g., sales, credit, shipping, and so on) into columns.

I've discovered students all seem to do about the same when I place complicated flowcharting problems on exams. For this reason, I now ask mostly short answer questions about flowcharting on exams.

I've found it important to emphasize the distinction between the types of documentation tools used by systems developers and auditors.

With logical data flow diagrams (DFD), it's interesting to discuss how developers go from an existing system to a new system. They begin with an existing analytical flow chart, turn it into a DFD, modify the DFD, and then generate a new analytical flowchart.

It’s worth taking some time to discuss the BPMN, as this is used in Chapters 7-9 to document the basic transaction cycles.

USERS OF SYSTEMS TECHNIQUES

Systems techniques are tools used in the analysis, design, and documentation of system and subsystem relationships. They are used by accountants who do systems work, either internally for their company or externally as consultants or auditors.Most auditing engagements are divided into two basic components: the interim audit, which involves internal control evaluation, and the financial statement audit, which involves substantive testing.Substantive testing is the direct verification of financial statement figures, placing such reliance on internal control as the results of the interim audit warrant.Internal Control Evaluation. Analytic flowcharts, document flowcharts, and forms distribution charts may be used by auditors to analyze the distribution of documents in a system. Several other system techniques, such as questionnaires and matrix methods, might also be used in the evaluation of internal controls.Compliance Testing. Auditors undertake compliance testing to confirm the existence, assess the effectiveness, and check the continuity of operation of internal controls on which reliance is to be placed.Working Papers. Working papers are the records kept by an auditor of the procedures and tests applied, the information obtained, and conclusions drawn during an audit engagement. Auditors use systems techniques to document and analyze the content of working papers. Internal control questionnaires, analytic flowcharts, and system flowcharts appear frequently in working papers because they are commonly used by auditors in the evaluation of internal controls. Data flow diagrams, HIPO charts, program flowcharts, branching and decision tables, and matrix methods Accounting Information Systems 11th Edition Bodnar Solutions Manual Visit TestBankDeal.com to get complete for all chapters

12 2 Systems Techniques and Documentation

might appear in working papers if they are part of the documentation of a system that is being reviewed.

Use of Systems Techniques in Systems Development A systems development project generally consists of three phases: systems analysis, systems design, and systems implementation.Systems Analysis. Logical data flow diagrams and analytic flowcharts are helpful in giving an overall picture with regard to transaction processing within the organization.Systems Design. Systems design formulates a blueprint for a completed system.Systems Implementation. Systems implementation involves the actual carrying out of the design plan.

Use of Systems Techniques by Sarbanes-Oxley Act Compliance Participants System documentation is the underpinning support of the internal control and process documentation requirements that have been set by the Sarbanes-Oxley Act (SOX).

SYSTEMS TECHNIQUES

Flowcharts are probably the most common systems technique. A flowchart is a symbolic diagram that shows the data flow and sequence of operations in a system.

Flowcharting Symbols. The basic symbols include the input/output symbol, the process symbol, the flowline symbol, and the annotation, comment symbol. The flowline symbol is used to link other symbols.Specialized input/output symbols may represent the I/O function and, in addition, denote the medium on which the information is recorded, or the manner of handling the information, or both. If no special symbol exists, the basic I/O symbol is used.Specialized process symbols represent the processing function and, in addition, identify the specific type of operation to be performed on the information. If no specialized symbol exists, the basic process symbol is used.The additional symbols are used to clarify a flowchart or to make the flowcharting of a complete process more convenient.

Symbol Use in Flowcharting Normal direction of flow is from left to right and top to bottom.

IPO and HIPO Charts IPO and HIPO charts are used primarily by systems development personnel. A HIPO chart contains two segments: the hierarchy chart that factors the processing task into various modules or subtasks and an IPO chart to describe the input-process-output requirements of each module. The hierarchy chart describes the overall system and provides a "table of contents" to the detailed IPO charts, usually through a numbering scheme.

Systems and Program Flowcharts Systems flowcharts are associated with the analysis phase of a systems project and program flowcharts with the design phase. A program flowchart is the design step between overall system design and coding the system for computer processing.A systems flowchart identifies the overall or broad flow of operations in a system.A program flowchart (also called a block flowchart) is more detailed concerning individual processing functions than a systems flowchart. Each of the processing functions depicted in a

Systems Techniques and Documentation 2 13

systems flowchart is further detailed in a program flowchart, similar to the successive layering of IPO charts in HIPO.

Logical Data Flow Diagrams Logical data flow diagrams or data flow diagrams (both abbreviated as DFD) are used by systems analysts to document the logical design of a system to satisfy the user's request.There are four DFD symbols. The terminator is used to indicate a source or a destination of data.The process indicates a process that transforms data. The data store is used to indicate a store of data. The data flow is used to indicate a flow of data. Although these terms and symbols are representative, many variations exist.Structured Analysis. DFD typically shown in layers of increasing detail, with the DFD in each layer being linked to each other.

Analytic, Document, and Forms Distribution Flowcharts Analytic flowcharts, document flowcharts, and forms distribution charts may be used to analyze the distribution of documents in a system.An analytic flowchart identifies all significant processing in an application, emphasizing processing tasks that apply controls.A document flowchart is similar in format to an analytic flowchart but contains less detail about the processing functions.A forms distribution chart illustrates the distribution of multiple-copy forms within an organization.

Analytic Flowcharting Illustration Planning the Flowchart. Flow is from top to bottom and left to right.Symbol Selection. For manual system, only several symbols are needed; symbols for documents, files, and processes are the most commonly used symbols.System Analysis. One must first understand the system to be flowcharted.Drawing the Flowchart Sandwich Rule. Every process symbol should have its inputs and outputs clearly specified.Use of Connector Symbol. This symbol is used to terminate the flowchart and then continue it on another page or in a different column.Entity-Column Relations. Columns in the flowchart typically represent individuals or departments. This is something that beginners often have difficulty with.

Unified Modeling Language (UML) UML is a technology that assists in the specification, visualization, and documentation of models developed to structure and design software systems. UML uses a variety of graphical techniques to model different aspects and views of software development projects at various levels of abstraction. In addition to techniques used to model the specifics of software development, UML includes techniques that are the functional equivalent of data flow diagrams, document flowcharting, and analytical flowcharting. UML version 2.0 defines thirteen types of diagrams, divided into three categories: structure diagrams, behavior diagrams, and interaction diagrams. When used to model business processes, the graphical techniques used in UML to prepare activity diagrams can result in diagrams that are very similar to analytic flowcharts.

Business Process Diagrams The Business Process Diagram (BPD) is a graphical representation of a business process. It focuses on the sequence of activities that constitute a business process, and also on the related business logic that

14 2 Systems Techniques and Documentation

guides that sequence of activities. Business Process Modeling and Notation (BPMN) is a widely accepted standard for modeling business processes using BPDs. Similar to UML, BPMN is a computer industry specification standard developed and supported by the OMG, a nonprofit computer industry consortium. BPMN is similar to UML but differs in that BPMN is a process-oriented approach to modeling whereas UML is an object-oriented approach. Where BPMN has a focus on business processes, UML has a focus on software design.

Narrative Techniques Interviews are useful for familiarizing the analyst with decision makers and their problems. Depth interviews allow the systems analyst to establish a personal working relationship with the manager.Open-ended questionnaires are a fact-gathering technique where persons provide written answers to general, rather than specific, questions. Narrative techniques also include document reviews.

Resource Utilization Analysis Flowcharts do not show the resources required to operate the system. Such resources must be considered both by the auditor and systems persons.

Work Measurement Work measurement includes the variety of techniques used to model, measure, or estimate clerical or other activities in a production framework. In an accounting framework, work measurement is similar to the concept employed in standard cost systems.

Work Distribution Analysis Work distribution analysis studies the assignment of specific tasks to employees. A task list is typically used to record each separate item of work performed by an individual and the average number of hours spent on each task per week.

Decision Analysis Techniques Branching and Decision Tables are used primarily by systems development personnel. Often the decision logic required in a computer program is sufficiently complex to mitigate the usefulness of the standard decision flowcharting symbol. In such cases, a branching table may be used to depict a decision function. A decision table is a tabular representation of a decision-making process. It is similar to a branching table but more complex in that it incorporates multiple decision criteria. Decision tables are constructed on an IF-THEN premise and appear as a two-dimensional matrix in general form.

Matrix Methods. Matrix methods are used by both auditors and systems personnel to present large volumes of data. The "work" or "spread" sheets used in accounting systems to spread or distribute account balances through different sub-classifications or to facilitate the closing process are common examples of matrix techniques.

Software for Systems Techniques A variety of software tools can be used to create flowcharts and other graphical systems techniques.Microsoft Office® Applications. Microsoft Visio® is a Microsoft Office® application that is targeted at the creation of flowcharts and other graphical diagrams. Microsoft PowerPoint® is a general presentation tool that contains specific drawing features that may be used to create flowcharts and other graphical diagrams. These same drawing tools are also available in both Microsoft Word® and Microsoft Excel®, allowing either of these general software applications to be used to prepare graphical diagrams and flowcharts.Computer-Aided Software Engineering (CASE). Computer-aided software engineering (CASE) is the process of using computer software technology that supports an automated