TEXAS SAFETY INSPECTION FINAL EXAM QUESTIONS

Page 1 of 35

SUCCESS!

1

TEXAS SAFETY INSPECTION FINAL EXAM QUESTIONS

WITH CORRECT ANSWERS LATEST UPDATE

ALREADY GRADED A+

True or False: A moped is not required to have insurance coverage. - CORRECT ANSWER✔✔False

True or False: There is a separate set of criteria for the inspection of trailers that exceed 7,500 pounds. - CORRECT ANSWER✔✔True

What additional item must you inspect for on a school bus? - CORRECT ANSWER✔✔Fire extinguisher

At what depth of fluid within the master cylinder should you reject the inspection? - CORRECT ANSWER✔✔1 inch below the top of the reservoir/below manufacturer recommended level

True or False: The power steering fluid being below the recommended level is not cause for rejecting the inspection. - CORRECT ANSWER✔✔False

What model year did the emission system begin to be installed by manufacturers? - CORRECT

ANSWER✔✔1968

• / 4

Page 2 of 35

SUCCESS!

2 Which percentage of light transmission would fail a tint inspection? - CORRECT ANSWER✔✔20%

Which windows on the vehicle should have the tint inspected? - CORRECT ANSWER✔✔The front windshield and the windows to the right and left of the driver

What is the minimum tire tread depth that is acceptable? - CORRECT ANSWER✔✔2/32 of an inch

True or False: You must issue a rejection of the inspection if the wheel studs, bolts, nuts, or lugs are loose, missing, or damaged. - CORRECT ANSWER✔✔True

What vehicles are exempt from the gas cap test? - CORRECT ANSWER✔✔Motorcycles

True or False: The exhaust system can be patched as long as no fumes are leaking from the system. - CORRECT ANSWER✔✔False

What model year vehicles (and newer) is the catalytic converter considered part of the exhaust system? - CORRECT ANSWER✔✔1984

What clearance lights are necessary on vehicles 80" or more in overall width? - CORRECT ANSWER✔✔2 amber lights in front, and 2 red lights in rear 2 / 4

Page 3 of 35

SUCCESS!

3

What color must the license plate lamp be? - CORRECT ANSWER✔✔White

True or False: All vehicles must have at least 1 rear reflector that is red in color and placed at a height of between 15 inches and 60 inches. - CORRECT ANSWER✔✔False

What model year vehicles require a center high-mounted stop light? - CORRECT ANSWER✔✔1986 and newer (passenger vehicles) and 1994 and newer (multipurpose vehicles, trucks, and buses)

What is the height requirement for stop lights? - CORRECT ANSWER✔✔Not more than 72" or less than 15"

True or False: The stop lights on the vehicle must be red or amber in color. - CORRECT ANSWER✔✔True

What model year vehicle is one stop light required on? - CORRECT ANSWER✔✔1959 and older

What model year vehicle are two stop lights required on? - CORRECT ANSWER✔✔1960 and newer

• / 4

Page 4 of 35

SUCCESS!

4 True or False: The tail lights can have the appearance of blue dots. - CORRECT ANSWER✔✔False

What model year vehicle is one tail light required on? - CORRECT ANSWER✔✔1959 and older

What model year vehicle are two tail lights required on? - CORRECT ANSWER✔✔1960 and newer

What color must the turn signal lights be in the rear? - CORRECT ANSWER✔✔Red

What model year vehicle (and newer) must be equipped with turn signal lights? - CORRECT

ANSWER✔✔1960

Which of the following reasons will result in a rejection of the inspection in regards to the head lights? - CORRECT ANSWER✔✔Light is mounted on vehicle more than 54" or less than 24"

True or False: Every vehicle must be equipped with at least two head lamps. - CORRECT ANSWER✔✔True

What model year vehicle (and newer) must be equipped with a high beam indicator that lights whenever the uppermost distribution of light from the head lights is in use. - CORRECT ANSWER✔✔1948

• / 4