TFM02 ACTUAL QUESTIONS AND

TFM02 (ACTUAL / ) QUESTIONS AND

VERIFIED ANSWERS

50 ft - <<>>>Travel distance: Class B fire hazard

30 ft - <<< >>>>Travel distance: Class B 3D and pressure fire hazard Answers

100 ft - <<>>>Travel distance: 125 Wheeled unit

for 3D fire hazard

Up to 3 2.5gal - <<>>>Class B high hazard: # of

AFFF or FFFP extinguishers required

30 seconds - <<>>>The pressure in a hydrostatic test of a cylinder shall be maintained for a minimum of how many seconds

150 percent - <<>>>A hydrostatic test pump, hand or power operated shall be capable of producing not more than what percent of the test pressure

150 degrees (F) - <<>>>The temperature used for drying shall not exceed what temperature inside the shell 1 / 2

90% to 100% - <<>>>Test pressure gauges shall be capable of indicating what percent to what percent of test pressure

10 percent - <<>>>Test pressure gauges shall be capable of being read within what percent of the test pressure

0.5 percent - <<>>>Test pressure gauges shall be certified accurate to plus or minus what percent or better of the full range of the gauge

350 degrees - <<>>>Extinguishers having aluminum shells and suspected of being exposed to temperatures of what degree (F) shall be removed from service and subjected to a hydrostatic test

25 psi - <<>>>A regulated source of pressure set no higher than what psi above operating service pressure shall be used to pressurize extinguishers

No - <<>>>Can compressed air through moisture traps be permitted for pressurizing even though stated in the instructions on older extinguishers

• / 2